PS3 reset問題

方法：还原到出厂设置

Backup your PS3 frequently. Plug in a removable hard drive or USB flash drive to your system. 备份你的PS3频频插上移动硬盘或USB闪存驱动器到您的系统。 Then, go to Settings and Backup.然后，去设置和备份。


If your system won't start, you will be unable to perform a backup before the restoration.如果您的系统无法启动，你将无法恢复之前执行备份。
打开您的PlayStation 3在安全模式后，在PlayStation控制冻结。
Power down the PS3 if it is currently on by pressing down the power button.掉电PS3的，如果它是目前通过按下电源按钮。 Wait until the red light turns on.等到红灯亮起。
Hold down the power button for 10 seconds, or until you hear 3 beeps.按住电源按钮10秒钟，或直到听到3声。 The power should remain off.电源应保持关闭。
Hold down the power button again for 10 seconds.再次按住电源按钮10秒钟。 You should hear 1 beep, then 2 quick beeps.您应该会听到1次哔声，然后2快的蜂鸣声。
Release the power button.松开电源键。
If you are in Safe Mode, you should get a message on the screen that says “Connect the controller using a USB cable, and then press the PS button.” [2]如果你是在安全模式下，你应该得到一个消息的屏幕，上面写着“使用USB电缆连接控制器，然后按下PS按钮。” [2]


Connect your controller. Scroll through the Safe Mode menu.通过安全模式菜单连接您的控制器。滚动。

Select “Restore PS3 System. ” Your hard drive will be reformatted back to its factory specifications. [3] 选择“恢复PS3的系统。”您的硬盘驱动器将被重新格式化恢复为出厂规格。 [3]

Go to System menu and Format icon in your XMB. Wait for several hours while the system reformats. 进入系统菜单和图标格式在你的XMB界面，等待几个小时，而在系统重新格式化。