我的電腦有一些問題出現...畫面變了藍色~麻煩大家解答一下我的問題~thx

2008-08-27 3:14 am
A problem has been detected and windows has been shut down to prevent damage to your computer.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you`ve seen this stop error screen,restart your computer.
If this screen appears again, follow these step:

check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.

*** STOP: 0x000000D1 ( 0x00000000, 0x00000002, 0x00000000, 0xB9D714BD)


*** ar5211.sys - Address B9D714BD base at B9D64000, DateStamp 41ca152e

Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.

呢d就係藍畫面既時候...出現既字...

之前部電腦2條512mb 既ram都壞左...
所以就換左新既512mb同1gb既ram...

咁部電腦而家即係有d咩問題?
同埋我應該要做d咩呀?

thx so much ar!!!
更新1:

"D1碼係泛指DRIVER有衝突, 從驅動程式著手先啱... " 多謝給予的意見先~ 但係我都係好明... 咁我即係應該要點做呢... 點樣係有衝突呀?

回答 (9)

2008-09-09 10:59 pm
我的電腦有一些問題出現...畫面變了藍色~麻煩大家解答一下我的問題~thx
A problem has been detected and windows has been shut down to prevent damage to your computer.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you`ve seen this stop error screen,restart your computer.
If this screen appears again, follow these step:

check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.

*** STOP: 0x000000D1 ( 0x00000000, 0x00000002, 0x00000000, 0xB9D714BD)


*** ar5211.sys - Address B9D714BD base at B9D64000, DateStamp 41ca152e

Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.

呢d就係藍畫面既時候...出現既字...

之前部電腦2條512mb 既ram都壞左...
所以就換左新既512mb同1gb既ram...

咁部電腦而家即係有d咩問題?
同埋我應該要做d咩呀?

thx so much ar!!!

2008-08-26 20:56:17 補充

"D1碼係泛指DRIVER有衝突, 從驅動程式著手先啱... "

多謝給予的意見先~

但係我都係好明...
咁我即係應該要點做呢...
點樣係有衝突呀?







去洗機00000000..........................
2008-09-09 10:16 pm
聽講兩條唔同容量既RAM+埋會唔相容架wor,你試下蚊左條512MB既出黎試下先啦
2008-09-01 4:29 pm
絕對唔建議1條512 加 1條 1GB
兩者個頻未必一樣會互相拖慢
另外咁好似行唔到dual channel
仲有一般來說好多RAM 都終身保養唔使一壞就買
除非代理執左笠

2008-09-01 08:33:02 補充:
如果hardware 有衝突
要逐樣拔出開機試
你可以選擇行一條1GB 可能快d
同埋冇衝突
2008-08-29 9:59 am
Sometime computer can't read your ram or HD, so you can do something on your computer.

1.you can check you ram or the cable are fully in there.(don't move the power cable)
2.reast the win xp
I thing not the driver!!
參考: me
2008-08-27 6:56 pm
我先前都試過有呢d問題...
應該係中病毒搞到windows壞了...
拎去電腦鋪洗機係解決方法..
如果你自己識洗仲好...
2008-08-27 4:10 pm
ar5211.sys is the driver for wireless network adapter of D-link/Atheros

This issue has been addressed in the Microsoft website:
http://support.microsoft.com/kb/927015/zh-tw
2008-08-27 4:03 am
如果係RAM有問題,你可以試下一條RAM 開機 or 換RAM的插槽位置.
如果唔得ge 重吸一次windows, 睇個樣都似係系統檔案中左毒.
2008-08-27 3:58 am
D1碼係泛指DRIVER有衝突, 從驅動程式著手先啱...
2008-08-27 3:29 am
你可能係你部電腦的視窗的問題 或者係你部電腦舊得濟的問題

建議你快D去修理佢


收錄日期: 2021-04-19 01:45:33
原文連結 [永久失效]:
https://hk.answers.yahoo.com/question/index?qid=20080826000051KK02642

檢視 Wayback Machine 備份