Wind power ,Emergency! 20points!

Wind power is the conversion of wind energy into useful form, such as electricity, using wind turbines. In windmills, wind energy is directly used to crush grain or to pump water. At the end of 2006, worldwide capacity of wind-powered generators was 73.9 gigawatts. Although wind currently produces just over 1% of world-wide electricity use, it accounts for approximately 20% of electricity production in Denmark, 9% in Spain, and 7% in Germany. Globally, wind power generation more than quadrupled between 2000 and 2006.

Wind power is produced in large scale wind farms connected to electrical grids, as well as in individual turbines for providing electricity to isolated locations.

Wind energy is plentiful, renewable, widely distributed, clean, and reduces greenhouse gas emissions when it displaces fossil-fuel-derived electricity. The intermittency of wind seldom creates insurmountable problems when using wind power to supply up to roughly 10% of total electrical demand (low to moderate penetration), but it presents challenges that are not yet fully solved when wind is to be used for a larger fraction of demand.

Wind Power


Wind power can be an excellent complement to a solar power system. Here in Colorado, when the sun isn't shining, the wind is usually blowing. Wind power is especially helpful here in the winter to capture both the ferocious and gentle mountain winds during the times of least sunlight and highest power use. In most locations (including here) wind is not suitable as the ONLY source of power--it simply fills in the gaps left by solar power quite nicely.



OPTIONS FOR GETTING STARTED IN WIND POWER

Build your own!
Building a wind generator from scratch is not THAT difficult of a project. You will need a shop with basic power and hand tools, and some degree of dedication. Large wind generators of 2000 Watts and up are a major project needing very strong construction, but smaller ones in the 1000 Watt, 8-11 foot range can be built fairly easily from scrapped car parts and be up and flying in a week! In fact, we highly recommend that you tackle a smaller wind turbine before even thinking about building a large one. You'll need to be able to cut and weld steel, and a metal lathe can be handy (though you could hire a machine shop that turns brake rotors do do some small steps for you).
In most locations, GENTLE winds (5-15 mph) are the most common, and strong winds are much more rare. As you'll see by examining our latest machines, our philosophy about designing wind turbines is to make large, sturdy machines that produce good power in low wind speeds, and are able to survive high wind events while still producing maximum power. The power available in the wind goes up by a factor of 8 as the windspeed doubles.

Other critical factors are rotor size and tower height. The power a wind turbine can harvest goes up by almost a factor of 4 as you double the rotor size. And making a tower higher gets you above turbulence for better performance and substially increased power output. Putting a wind turbine on a short tower is like mounting solar panels in the shade!