✔ 最佳答案
First make sure your router wireless is enable, and your PDA are using the correct network card, Go to Start --> Settings --> Connecctions. Select Network cards. Choose internet from the meun. Choose network card "Dell Amix x51/X51v WLAN Wireless Adapter (default) or other one you will be using.
Then select auto assign IP (common) or or enter a Static (set) IP, depends on your router setting.
Then check if your device is enabled with wireless capability. If the green LED in the upper right hard corner is ON, it means the device is set to receive single.
The select your wireless netwrok, Go to Start --> Settings --> Connections. Select add and press Netwrok Card. In the Configure Wireless Networks windows, select your wireless SSID and select OK.
If not listed, in Configure Wireless Networks windows, Select New, they enter your router SSID. Go to Network key to enter Authentication and data encryption (your router wireless connection password, if any). Select your 802.1X type. and EAP type and press OK to save.
Let me know if your need more help on connecing your PDA to router
2007-06-30 01:35:14 補充:
You can reset your network key. To access to your router setting, type in your LAN IP with the last # is 1, Default: 192.168.0.1 (unless you have changed). It will prompt you for your password. In default, it's username: admin password: "leave it blank/empty"
2007-06-30 01:36:00 補充:
Once you are in to config page, you should see a "Run wizard" button in the middle of the page. To make things easier for you, you could use that function and it will guide you to setup your router settings.
2007-06-30 01:37:20 補充:
Keep on clinking Next to skip the ones you don't need to change until you see "Set 802.11g Wilreless LAN Connecton" setup, you will be able to setup your network key for your wireless. Once done, click Restart and the router will be restarted and settings will be save and changes.
2007-06-30 01:37:36 補充:
ORYou could just go into the wireless setting directly. Go to the Wireless icon on the left hand side of the page (should be the 2nd one after Wizard)