電腦不能進入windows

Issue:
Computer stops at verifying dmi pool data.

Cause:
Corrupt boot files on the computer.
Settings for hard disk drive are not correct.
Floppy diskette or CD in computer causing issue.
Boot devices not set properly.
BIOS corrupt or misc. setting not set properly.
Connections loose or disconnected.
Bad Hard disk drive or other bad hardware.

Solution:
Corrupt boot files on the computer
If the computer has no bootable files on the drive it is attempting to boot from it is possible that the computer may halt at " verifying dmi pool data...".

To resolve this issue:
Boot from a bootable floppy diskette. Ensure that this diskette was made on the same Microsoft Windows operating system that is installed on your computer.
Once at the A:\> prompt type "sys c:" and press enter. This should report the message "File system transferred". Once transferred remove the diskette and reboot the computer.

If the computer continues to not boot attempt to re-create the master boot record by booting from the bootable floppy diskette again. Once at the A:\> prompt type "fdisk /mbr" and press enter. This should return you to the prompt without giving you any message. Once at the prompt remove the diskette and reboot the computer.

朋友：
　　自己部主機是用ＳＡＴＡ　Ｉ硬碟的，試過去到進
入視窗前有一（－）號閃閃下時停下來，換了另一個電
腦火牛的ＳＡＴＡ電源接頭後就沒事了，可能舊接頭有
問題不能夠推動硬碟進入視窗。
雲遊四海，浪跡江湖。