SATA I 快還是USB2.0快

SATA 1.5 Gbit/s First-generation SATA interfaces, also known as SATA/150 or (erroneously) as SATA 1, communicate at a rate of 1.5 gigabits per second (Gbit/s). Taking into account 8b10b coding overhead, the actual uncoded transfer-rate is 1.2 Gbit/s, or 150 megabytes per second (MB/s). In actual operation, SATA/150 and PATA/133 are comparable in terms of their theoretical burst-throughput. However, newer SATA devices offer enhancements (such as native command queuing) to SATA's performance in a multitask environment.
During the initial period after SATA/150's finalization, both adapter and drive manufacturers used a "bridge chip" to convert existing designs with the PATA-interface to the SATA-interface. Bridged drives have a SATA connector, may include either or both kinds of power connectors, and generally perform identically to native drives. They generally lack support for some SATA-specific features (such as NCQ). Bridged products gradually gave way to native SATA products.



USB 2.0 has a raw data rate at 480Mbps, and it is rated 40 times faster than its predecessor interface, USB 1.1, which tops at 12Mbps. Originally, USB 2.0 was intended to go only as fast as 240Mbps, but in October 1999, USB 2.0 Promoter Group pumped up the speed to 480Mbps.

As far as we know, effective rate reaches at 40MBps or 320Mbps for bulk transfer on a USB 2.0 hard drive with no one else is sharing the bus. Flash Drives seem to be catching up too with the some hitting 30MB/s milestone. For all we know, manufacturers may claim USB interface becoming the performance bottleneck for flash drives as early as 2007. Additional notes from Alex Esquenet - our engineer friend based in Belgium: "A fast usb host can achieve 40 MBytes/sec. The theorical 60 MB/sec cannot be achieved, because of the margin taken between the sof's (125 us), so if a packet cannot take place before the sof, the packet will be rescheduled after the next sof. On top of that, all the USB transactions are handled by software on the PC. For instance, a USB host on a PCI bus will send or receive the data via the PCI bus; the stack will prepare the next data in memory and receive interrupt from the host."