100Mbps to 1000Mbps?
2007-01-23 1:24 am
My current LAN speed is at 100Mbps. My bos want me to improve it to 1000Mbps. Can somebody tell me what type of LAN cable, switch, network card (etc) I should use. Please give me the link. Please help me.
回答 (7)
2007-01-23 1:34 am
✔ 最佳答案
Any cat5 ethernet cable will work, most likly including whats instaled in your office.Here are swhiches you can use http://www.newegg.com/Product/ProductList.asp?DEPA=0&type=&Description=gigabit+switch&Submit=ENE&N=0&Ntk=all&Go.x=0&Go.y=0
And here are cards http://www.newegg.com/Product/ProductList.asp?DEPA=0&type=&Description=gigabit+card&Submit=ENE&N=0&Ntk=all&Go.x=0&Go.y=0
Make
2007-01-23 4:14 pm
you need a nic or lan card that can carry data 1gb speed.
cat6 cable connection.
cisco high speed switch.
cat6 cable connection.
cisco high speed switch.
2007-01-23 2:42 am
Assuming you're talking about just a local network...
You will need to replace, at the very least, your network cards, routers and switches with hardware that can handle 1000Mb/s.
You will probably need to replace all your cabling, too - use Cat6 cable, which can handle the higher data rate....and consider professional cabling service. This kind of data rate is really pushing the limits of what can be done with copper, you can afford far fewer error-causing bad joints, kinks, etc.
Be ready to break your network down into physically smaller segments, with gigabit bridges between them.... speed degrades over long spans.
Have fun!
You will need to replace, at the very least, your network cards, routers and switches with hardware that can handle 1000Mb/s.
You will probably need to replace all your cabling, too - use Cat6 cable, which can handle the higher data rate....and consider professional cabling service. This kind of data rate is really pushing the limits of what can be done with copper, you can afford far fewer error-causing bad joints, kinks, etc.
Be ready to break your network down into physically smaller segments, with gigabit bridges between them.... speed degrades over long spans.
Have fun!
2007-01-23 2:09 am
Your cabling must all be CAT5e or better. All NICs and switches will need to be swapped out for gigabit.
If your cabling infrastructure is CAT5e or better but has been around for a while, I'd strongly suggest you get it certified by a professional cable installer. Gigabit cabling is much less forgiving of errors than 100 megabit is. If you have any slop in the wiring (excessive untwist, sloppy punchdownds, tight bends, etc.) it will need to be corrected.
If your cabling infrastructure is CAT5e or better but has been around for a while, I'd strongly suggest you get it certified by a professional cable installer. Gigabit cabling is much less forgiving of errors than 100 megabit is. If you have any slop in the wiring (excessive untwist, sloppy punchdownds, tight bends, etc.) it will need to be corrected.
參考: Network engineer.
2007-01-23 1:31 am
Cat 5e, 6 or better for cable
For switch and NIC card, any card/switch that is 10/100/1000 will do just fine.
FOr internet access, you are still limited to your provider's speed.
For switch and NIC card, any card/switch that is 10/100/1000 will do just fine.
FOr internet access, you are still limited to your provider's speed.
2007-01-23 1:55 am
How big is your network? A 1000Mbps switch is expensive. Also, why does your boss want to do that? It does not improve Internet speed.
2007-01-23 1:31 am
T3. or internet 2 if youre in europe
i'm just curious... what do you need all of that speed for?? i have like... 9mbs lol
i'm just curious... what do you need all of that speed for?? i have like... 9mbs lol
收錄日期: 2021-04-28 23:37:52
原文連結 [永久失效]:
https://hk.answers.yahoo.com/question/index?qid=20070122172427AApIQAL