✔ 最佳答案
VER1.5版
可直接使用 iso, 不用擔心降版本時所做成的風險.
因為在如果降版本(eg 2.71>1.5)時出左事 係無保用架
另附:
For 新手 裝最新 devhook 0.43同點玩 iso (only 1.5)
號更新devhook43可截圖完整傻瓜包〔sendspace空間〕
http://www.sendspace.com/file/uhput8
號更新devhook43可截圖完整傻瓜包〔Uploading空間〕
http://www.uploading.com/?get=XBVNBXLZ
號更新devhook43WMA激活補丁〔sendspace空間〕下載按這裏
http://www.sendspace.com/file/xr9b9h
以下為devhook4343的設定;安裝目錄圖:
MSD:┳ISO/ (ISO,CSO鏡像)
┣dh/
┗PSP/
┗GAME/
┣devhook4x
┣devhook4x%
devhook43設置
UMD MOUNT: ISO ANYUMD
UMD VERSION:2.XX-2.00
FIRMWARE:2.60
CPU:222mhz
boot select:reboot XMB
如需里面密碼:0000
7.10號更新devhook43WMA激活補丁只要覆蓋(copy and paste) 之前既傻瓜包就ok, 只會覆蓋新 files, 請放心, 好易的.
To play ISO:
1.unzip using winrar
(利用 winrar 軟件解壓下載回來的 game, 解壓到 .ISO 檔案, 可以用 CISO Utility 再壓成 devhook可以認到既 .CSO)
2.in the ms root : create a folder called "ISO"
(在 MS棒目錄, 開個檔案夾叫 ISO <--如果冇)
3.only put filename.iso or filename.cso <--- compressed iso
into "ISO" folder , only iso & cso can be recognised by devhood 0.43, do not play .dax iso with devhood
(放之前解壓既 .ISO or .CSO 遊戲檔到 ISO 檔案夾)
4.in fw 1.5 desktop, go to game-->memory stick--> load devhook 0.43, press O for setting, for setting info, refer to above
(開機到1.5固件桌面, 到game 子目錄-->ms棒-->按 O or X 入 devhook 0.43), PSP 字出現, 入到 devhook 設定介面按 O, 然後到各設定好 <--照上面設定參數)
5. Provide there is compatible iso , and you choose to start, the psp will load to fw2.6 and the game should start automatically
(只有 .ISO/.CSO遊戲而你又在設定選擇, 按 devhook 目錄既 "START" 就會模擬2.6固件同自動引導遊戲, 一定要有任何一隻 UMD係機內, 唔係玩唔到)
6. Press "home" + (L+R) to quit game, make sure you save first.
(要出遊戲請同時按 "home" + "L";;; + "R";;; 鏈, 然後問你要出game, 再按 yes)
7.After quitting, it will be back to fw2.6
(之後會出到2.6固件桌面)
8. you can use fw 2.6 as normal including internet in BIG 5
(模擬2.6固件係可以用所有野的, 包中文網頁上網, 利用 wifi 但一定要devhook設定速度 222MHz, 聽歌, 睇片, 玩正版 game 不過要以下設定:
devhook 43 玩正版 UMD 碟遊戲基本設定:
UMD SELECT (選 - - UMD DISC - - )
UMD MOUNT (選 UMD DISC )
UMD VERSION (選 2.XX -> 2.00 )
FIRMWARE (選 2.60 )
CPU CLOCK (選 222 MHz / 111 MHz )
BOOT SELECT (選 REBOOT XMB )
REMOTE CTRL (選 remote controller)
最後選 START 運行devhook43,系統會自行 REBOOT 至 FW 2.60 並運行你所 選擇 UMD 碟 遊戲)
9. if you want to swap iso, please highlight "game umd" icon (don't press it) and use home + "L or R" to swap, then press to load that game.
(如果你想在 2.6 介面下轉game, 請 highlight "game umd"個 icon, 唔好按下, 同時按 "Home" + "L";;; or "Home" + "R";;; , 等3,4 秒, 新 game個 umd畫面出現時, 可按下load遊戲)
10. if you want to reset back to fw1.5, then "press up + hold" power switch for 4 sec, screen will be off, then "press up" power switch to restart psp at fw1.5. or some versions allow just press "home" + 口
(如果你想返回 1.5固件, 可長按上 "POWER" 掣 4 秒, 畫面關後再按 POWER 掣 , 有些新版可以按 "HOME" + "口" 就自動restart 到1.5固件)